nvm-sh/nvm

• Intro
• About
• Installing and Updating
  • Install & Update Script
    • Additional Notes
    • Installing in Docker
      • Installing in Docker for CICD-Jobs
    • Troubleshooting on Linux
    • Troubleshooting on macOS
    • Ansible
  • Verify Installation
  • Important Notes
  • Git Install
  • Manual Install
  • Manual Upgrade
• Usage
  • Long-term Support
  • Migrating Global Packages While Installing
  • Migrating Global Packages Between Installed Versions
  • Offline Install
  • Default Global Packages From File While Installing
  • io.js
  • System Version of Node
  • Listing Versions
  • Setting Custom Colors
    • Persisting custom colors
    • Suppressing colorized output
  • Restoring PATH
  • Set default node version
  • Use a mirror of node binaries
    • Pass Authorization header to mirror
  • Platforms without official binaries
  • .nvmrc
  • Deeper Shell Integration
    • Calling nvm use automatically in a directory with a .nvmrc file
      • bash
      • zsh
      • fish
• Running Tests
• Environment variables
• Bash Completion
  • Usage
• Compatibility Issues
• Installing nvm on Alpine Linux
  • Alpine Linux 3.13+
  • Alpine Linux 3.5 - 3.12
• Uninstalling / Removal
  • Manual Uninstall
• Docker For Development Environment
• Problems
• macOS Troubleshooting
• WSL Troubleshooting
• Maintainers
• Project Support
• Enterprise Support
• License
• Copyright notice

nvm allows you to quickly install and use different versions of node via the command line.

Example:

$ nvm install 24
Now using node v24.14.0 (npm v11.9.0)
$ node -v
v24.14.0
$ nvm use 22
Now using node v22.22.1 (npm v10.9.4)
$ node -v
v22.22.1
$ nvm use 20
Now using node v20.20.1 (npm v10.8.2)
$ node -v
v20.20.1

Simple as that!

nvm is a version manager for node.js, designed to be installed per-user, and invoked per-shell. nvm works on any POSIX-compliant shell (sh, dash, ksh, zsh, bash), in particular on these platforms: unix, macOS, and Windows WSL.

To install or update nvm, you should run the install script. To do that, you may either download and run the script manually, or use the following cURL or Wget command:

curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash

wget -qO- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash

Running either of the above commands downloads a script and runs it. The script clones the nvm repository to ~/.nvm, and attempts to add the source lines from the snippet below to the correct profile file (~/.bashrc, ~/.bash_profile, ~/.zshrc, or ~/.profile). If you find the install script is updating the wrong profile file, set the $PROFILE env var to the profile file’s path, and then rerun the installation script.

export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm

• If the environment variable $XDG_CONFIG_HOME is present, it will place the nvm files there.

• You can add --no-use to the end of the above script to postpone using nvm until you manually use it:

export NVM_DIR="$([ -z "${XDG_CONFIG_HOME-}" ] && printf %s "${HOME}/.nvm" || printf %s "${XDG_CONFIG_HOME}/nvm")"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" --no-use # This loads nvm, without auto-using the default version

• You can customize the install source, directory, profile, and version using the NVM_SOURCE, NVM_DIR, PROFILE, and NODE_VERSION variables. Eg: curl ... | NVM_DIR="path/to/nvm". Ensure that the NVM_DIR does not contain a trailing slash.

• The installer can use git, curl, or wget to download nvm, whichever is available.

• You can instruct the installer to not edit your shell config (for example if you already get completions via a zsh nvm plugin) by setting PROFILE=/dev/null before running the install.sh script. Here's an example one-line command to do that: PROFILE=/dev/null bash -c 'curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash'

When invoking bash as a non-interactive shell, like in a Docker container, none of the regular profile files are sourced. In order to use nvm, node, and npm like normal, you can instead specify the special BASH_ENV variable, which bash sources when invoked non-interactively.

# Use bash for the shell
SHELL ["/bin/bash", "-o", "pipefail", "-c"]

# Create a script file sourced by both interactive and non-interactive bash shells
ENV BASH_ENV="${HOME:-/root}/.bash_env"
RUN touch "${BASH_ENV}"
RUN echo '. "${BASH_ENV}"' >> ~/.bashrc

# Download and install nvm
RUN curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | PROFILE="${BASH_ENV}" bash
RUN echo node > .nvmrc
RUN nvm install

More robust, works in CI/CD-Jobs. Can be run in interactive and non-interactive containers. See #3531.

FROM ubuntu:latest
ARG NODE_VERSION=20

# install curl
RUN apt update && apt install curl -y

# install nvm
RUN curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash

# set env
ENV NVM_DIR="${HOME:-/root}/.nvm"

# install node
RUN bash -c "source $NVM_DIR/nvm.sh && nvm install $NODE_VERSION"

# set ENTRYPOINT for reloading nvm-environment
ENTRYPOINT ["bash", "-c", "source $NVM_DIR/nvm.sh && exec \"$@\"", "--"]

# set cmd to bash
CMD ["/bin/bash"]

This example defaults to installation of nodejs version 20.x.y. Optionally you can easily override the version with docker build args like:

docker build -t nvmimage --build-arg NODE_VERSION=19 .

After creation of the image you can start container interactively and run commands, for example:

docker run --rm -it nvmimage

root@0a6b5a237c14:/# nvm -v
0.40.8

root@0a6b5a237c14:/# node -v
v19.9.0

root@0a6b5a237c14:/# npm -v
9.6.3

Noninteractive example:

user@host:/tmp/test $ docker run --rm -it nvmimage node -v
v19.9.0
user@host:/tmp/test $ docker run --rm -it nvmimage npm -v
9.6.3

On Linux, after running the install script, if you get nvm: command not found or see no feedback from your terminal after you type command -v nvm, simply close your current terminal, open a new terminal, and try verifying again. Alternatively, you can run the following commands for the different shells on the command line:

bash: source ~/.bashrc

zsh: source ~/.zshrc

ksh: . ~/.profile

These should pick up the nvm command.

Since OS X 10.9, /usr/bin/git has been preset by Xcode command line tools, which means we can't properly detect if Git is installed or not. You need to manually install the Xcode command line tools before running the install script, otherwise, it'll fail. (see #1782)

If you get nvm: command not found after running the install script, one of the following might be the reason:

• Since macOS 10.15, the default shell is zsh and nvm will look for .zshrc to update, none is installed by default. Create one with touch ~/.zshrc and run the install script again.

• If you use bash, the previous default shell, your system may not have .bash_profile or .bashrc files where the command is set up. Create one of them with touch ~/.bash_profile or touch ~/.bashrc and run the install script again. Then, run . ~/.bash_profile or . ~/.bashrc to pick up the nvm command.

• You have previously used bash, but you have zsh installed. You need to manually add these lines to ~/.zshrc and run . ~/.zshrc.

• You might need to restart your terminal instance or run . ~/.nvm/nvm.sh. Restarting your terminal/opening a new tab/window, or running the source command will load the command and the new configuration.

• If the above didn't help, you might need to restart your terminal instance. Try opening a new tab/window in your terminal and retry.

If the above doesn't fix the problem, you may try the following:

• If you use bash, it may be that your .bash_profile (or ~/.profile) does not source your ~/.bashrc properly. You could fix this by adding source ~/<your_profile_file> to it or following the next step below.

• Try adding the snippet from the install section, that finds the correct nvm directory and loads nvm, to your usual profile (~/.bash_profile, ~/.zshrc, ~/.profile, or ~/.bashrc).

• For more information about this issue and possible workarounds, please refer here

Note For Macs with the Apple Silicon chip, node started offering arm64 arch Darwin packages since v16.0.0 and experimental arm64 support when compiling from source since v14.17.0. If you are facing issues installing node using nvm, you may want to update to one of those versions or later.

You can use a task:

- name: Install nvm
  ansible.builtin.shell: >
    curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash
  args:
    creates: "{{ ansible_env.HOME }}/.nvm/nvm.sh"

To verify that nvm has been installed, do:

command -v nvm

which should output nvm if the installation was successful. Please note that which nvm will not work, since nvm is a sourced shell function, not an executable binary.

Note: On Linux, after running the install script, if you get nvm: command not found or see no feedback from your terminal after you type command -v nvm, simply close your current terminal, open a new terminal, and try verifying again.

If you're running a system without prepackaged binary available, which means you're going to install node or io.js from its source code, you need to make sure your system has a C++ compiler. For OS X, Xcode will work, for Debian/Ubuntu based GNU/Linux, the build-essential and libssl-dev packages work.

Note: nvm also supports Windows in some cases. It should work through WSL (Windows Subsystem for Linux) depending on the version of WSL. It should also work with Git Bash (MSYS) or Cygwin. Otherwise, for Windows, a few alternatives exist, which are neither supported nor developed by us:

• nvm-windows
• nodist
• nvs

Note: nvm does not support Fish either (see #303). Alternatives exist, which are neither supported nor developed by us:

• bass allows you to use utilities written for Bash in fish shell
• fast-nvm-fish only works with version numbers (not aliases) but doesn't significantly slow your shell startup
• plugin-nvm plugin for Oh My Fish, which makes nvm and its completions available in fish shell
• nvm.fish - The Node.js version manager you'll adore, crafted just for Fish
• fish-nvm - Wrapper around nvm for fish, delays sourcing nvm until it's actually used.

Note: We still have some problems with FreeBSD, because there is no official pre-built binary for FreeBSD, and building from source may need patches; see the issue ticket:

• [#900] [Bug] node on FreeBSD may need to be patched
• nodejs/node#3716

Note: On OS X, if you do not have Xcode installed and you do not wish to download the ~4.3GB file, you can install the Command Line Tools. You can check out this blog post on how to just that:

• How to Install Command Line Tools in OS X Mavericks & Yosemite (Without Xcode)

Note: On OS X, if you have/had a "system" node installed and want to install modules globally, keep in mind that:

• When using nvm you do not need sudo to globally install a module with npm -g, so instead of doing sudo npm install -g grunt, do instead npm install -g grunt
• If you have an ~/.npmrc file, make sure it does not contain any prefix settings (which is not compatible with nvm)
• You can (but should not?) keep your previous "system" node install, but nvm will only be available to your user account (the one used to install nvm). This might cause version mismatches, as other users will be using /usr/local/lib/node_modules/* VS your user account using ~/.nvm/versions/node/vX.X.X/lib/node_modules/*

Homebrew installation is not supported. If you have issues with homebrew-installed nvm, please brew uninstall it, and install it using the instructions below, before filing an issue.

Note: If you're using zsh you can easily install nvm as a zsh plugin. Install zsh-nvm and run nvm upgrade to upgrade (you can set NVM_AUTO_USE=true to have it automatically detect and use .nvmrc files).

Note: Git versions before v1.7 may face a problem of cloning nvm source from GitHub via https protocol, and there is also different behavior of git before v1.6, and git prior to v1.17.10 can not clone tags, so the minimum required git version is v1.7.10. If you are interested in the problem we mentioned here, please refer to GitHub's HTTPS cloning errors article.

If you have git installed (requires git v1.7.10+):

1. clone this repo in the root of your user profile
   • cd ~/ from anywhere then git clone https://github.com/nvm-sh/nvm.git .nvm
2. cd ~/.nvm and check out the latest version with git checkout v0.40.8
3. activate nvm by sourcing it from your shell: . ./nvm.sh

Now add these lines to your ~/.bashrc, ~/.profile, or ~/.zshrc file to have it automatically sourced upon login: (you may have to add to more than one of the above files)

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

For a fully manual install, execute the following lines to first clone the nvm repository into $HOME/.nvm, and then load nvm:

export NVM_DIR="$HOME/.nvm" && (
  git clone https://github.com/nvm-sh/nvm.git "$NVM_DIR"
  cd "$NVM_DIR"
  git checkout `git describe --abbrev=0 --tags --match "v[0-9]*" $(git rev-list --tags --max-count=1)`
) && \. "$NVM_DIR/nvm.sh"

Now add these lines to your ~/.bashrc, ~/.profile, or ~/.zshrc file to have it automatically sourced upon login: (you may have to add to more than one of the above files)

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

For manual upgrade with git (requires git v1.7.10+):

1. change to the $NVM_DIR
2. pull down the latest changes
3. check out the latest version
4. activate the new version

(
  cd "$NVM_DIR"
  git fetch --tags origin
  git checkout `git describe --abbrev=0 --tags --match "v[0-9]*" $(git rev-list --tags --max-count=1)`
) && \. "$NVM_DIR/nvm.sh"

To download, compile, and install the latest release of node, do this:

nvm install node # "node" is an alias for the latest version

To install a specific version of node:

nvm install 14.7.0 # or 16.3.0, 12.22.1, etc

To set an alias:

nvm alias my_alias v14.4.0

Make sure that your alias does not contain any spaces or slashes.

The first version installed becomes the default. New shells will start with the default version of node (e.g., nvm alias default).

You can list available versions using ls-remote:

nvm ls-remote

When no version or --lts filter is given, the list also marks the version the node alias would install, and every version that one of your own aliases would resolve to. Each kind of annotation always starts in the same column, so the output can be sliced with cut -c or similar tools:

        v20.9.0   (Latest LTS: Iron)                        (Aliases: work)
        v21.0.0
        v21.1.0
        v21.2.0                            (Latest: node)   (Aliases: default)

And then in any new shell just use the installed version:

nvm use node

Or you can just run it:

nvm run node --version

Or, you can run any arbitrary command in a subshell with the desired version of node:

nvm exec 4.2 node --version

You can also get the path to the executable to where it was installed:

nvm which 12.22

In place of a version pointer like "14.7" or "16.3" or "12.22.1", you can use the following special default aliases with nvm install, nvm use, nvm run, nvm exec, nvm which, etc:

• node: this installs the latest version of node
• iojs: this installs the latest version of io.js
• stable: this alias is deprecated, and only truly applies to node v0.12 and earlier. Currently, this is an alias for node.
• unstable: this alias points to node v0.11 - the last "unstable" node release, since post-1.0, all node versions are stable. (in SemVer, versions communicate breakage, not stability).
• current: the version currently active in this shell (i.e. what node resolves to via $PATH). It is not affected by .nvmrc. Useful when you want to refer to the active version explicitly — e.g. nvm which current always prints the path to the active node, regardless of whether an .nvmrc file is present.

Node has a schedule for long-term support (LTS) You can reference LTS versions in aliases and .nvmrc files with the notation lts/* for the latest LTS, and lts/argon for LTS releases from the "argon" line, for example. In addition, the following commands support LTS arguments:

• nvm install --lts / nvm install --lts=argon / nvm install 'lts/*' / nvm install lts/argon
• nvm uninstall --lts / nvm uninstall --lts=argon / nvm uninstall 'lts/*' / nvm uninstall lts/argon
• nvm use --lts / nvm use --lts=argon / nvm use 'lts/*' / nvm use lts/argon
• nvm exec --lts / nvm exec --lts=argon / nvm exec 'lts/*' / nvm exec lts/argon
• nvm run --lts / nvm run --lts=argon / nvm run 'lts/*' / nvm run lts/argon
• nvm ls-remote --lts / nvm ls-remote --lts=argon nvm ls-remote 'lts/*' / nvm ls-remote lts/argon
• nvm version-remote --lts / nvm version-remote --lts=argon / nvm version-remote 'lts/*' / nvm version-remote lts/argon

Any time your local copy of nvm connects to https://nodejs.org, it will re-create the appropriate local aliases for all available LTS lines. These aliases (stored under $NVM_DIR/alias/lts), are managed by nvm, and you should not modify, remove, or create these files - expect your changes to be undone, and expect meddling with these files to cause bugs that will likely not be supported.

To get the latest LTS version of node and migrate your existing installed packages, use:

nvm install --reinstall-packages-from=current 'lts/*'

If you want to install a new version of Node.js and migrate npm packages from a previous version:

nvm install --reinstall-packages-from=node node

This will first use "nvm version node" to identify the current version you're migrating packages from. Then it resolves the new version to install from the remote server and installs it. Lastly, it runs "nvm reinstall-packages" to reinstall the npm packages from your prior version of Node to the new one.

You can also install and migrate npm packages from specific versions of Node like this:

nvm install --reinstall-packages-from=5 6
nvm install --reinstall-packages-from=iojs v4.2

Note that reinstalling packages explicitly does not update the npm version — this is to ensure that npm isn't accidentally upgraded to a broken version for the new node version.

To update npm at the same time add the --latest-npm flag, like this:

nvm install --reinstall-packages-from=default --latest-npm 'lts/*'

or, you can at any time run the following command to get the latest supported npm version on the current node version:

nvm install-latest-npm

If you've already gotten an error to the effect of "npm does not support Node.js", you'll need to (1) revert to a previous node version (nvm ls & nvm use <your latest _working_ version from the ls>), (2) delete the newly created node version (nvm uninstall <your _broken_ version of node from the ls>), then (3) rerun your nvm install with the --latest-npm flag.

--reinstall-packages-from is tied to nvm install. To migrate global npm packages between versions you already have installed, without (re)installing anything, nvm use the destination and run nvm reinstall-packages as a standalone command, pointing at the version you want to copy from:

nvm use 22.22.2
nvm reinstall-packages 22.20.0

This reinstalls all global packages from 22.20.0 into the currently-active version (22.22.2). As with --reinstall-packages-from, the npm version itself is not changed.

If you've previously downloaded a node version (or it's still in the cache), you can install it without any network access using the --offline flag:

nvm install --offline 14.7.0

This resolves versions using only locally installed versions and cached downloads. It will not attempt to download anything. This is useful in air-gapped environments, on planes, or when you want to avoid network latency.

You can combine --offline with --lts to install the latest cached LTS version (as long as LTS aliases have been populated by a prior nvm ls-remote --lts):

nvm install --offline --lts

If you have a list of default packages you want installed every time you install a new version, we support that too -- just add the package names, one per line, to the file $NVM_DIR/default-packages. You can add anything npm would accept as a package argument on the command line.

# $NVM_DIR/default-packages

rimraf
object-inspect@1.0.2
stevemao/left-pad

If you want to install io.js:

nvm install iojs

If you want to install a new version of io.js and migrate npm packages from a previous version:

nvm install --reinstall-packages-from=iojs iojs

The same guidelines mentioned for migrating npm packages in node are applicable to io.js.

If you want to use the system-installed version of node, you can use the special default alias "system":

nvm use system
nvm run system --version

If you want to see what versions are installed:

nvm ls

If you want to see what versions are available to install:

nvm ls-remote

You can set five colors that will be used to display version and alias information. These colors replace the default colors. Initial colors are: g b y r e

Color codes:

r/R = red / bold red

g/G = green / bold green

b/B = blue / bold blue

c/C = cyan / bold cyan

m/M = magenta / bold magenta

y/Y = yellow / bold yellow

k/K = black / bold black

e/W = light grey / white

nvm set-colors rgBcm

If you want the custom colors to persist after terminating the shell, export the NVM_COLORS variable in your shell profile. For example, if you want to use cyan, magenta, green, bold red and bold yellow, add the following line:

export NVM_COLORS='cmgRY'

nvm help (or -h or --help), nvm ls, nvm ls-remote and nvm alias usually produce colorized output. You can disable colors with the --no-colors option (or by setting the environment variable TERM=dumb):

nvm ls --no-colors
nvm help --no-colors
TERM=dumb nvm ls

To restore your PATH, you can deactivate it:

nvm deactivate

To set a default Node version to be used in any new shell, use the alias 'default':

nvm alias default node # this refers to the latest installed version of node
nvm alias default 18 # this refers to the latest installed v18.x version of node
nvm alias default 18.12  # this refers to the latest installed v18.12.x version of node

To use a mirror of the node binaries, set $NVM_NODEJS_ORG_MIRROR:

export NVM_NODEJS_ORG_MIRROR=https://nodejs.org/dist
nvm install node

NVM_NODEJS_ORG_MIRROR=https://nodejs.org/dist nvm install 4.2

To use a mirror of the io.js binaries, set $NVM_IOJS_ORG_MIRROR:

export NVM_IOJS_ORG_MIRROR=https://iojs.org/dist
nvm install iojs-v1.0.3

NVM_IOJS_ORG_MIRROR=https://iojs.org/dist nvm install iojs-v1.0.3

Some platforms and architectures have no binary on the default host at all; see Platforms without official binaries.

nvm use will not, by default, create a "current" symlink. Set $NVM_SYMLINK_CURRENT to "true" to enable this behavior, which is sometimes useful for IDEs. Note that using nvm in multiple shell tabs with this environment variable enabled can cause race conditions.

To pass an Authorization header through to the mirror url, set $NVM_AUTH_HEADER

NVM_AUTH_HEADER="Bearer secret-token" nvm install node

nodejs.org does not publish a binary for every platform and architecture nvm can detect. Where it does not, nvm install falls back by default to compiling from source, which is slow and needs a C++ toolchain (see Important Notes); set $NVM_NO_SOURCE_FALLBACK to 1 to make a missing binary an error instead.

unofficial-builds.nodejs.org (nodejs/unofficial-builds) publishes binaries for platforms the Node.js project does not officially support. To use them, point $NVM_NODEJS_ORG_MIRROR at it:

export NVM_NODEJS_ORG_MIRROR=https://unofficial-builds.nodejs.org/download/release

Neither host is gapless, and both change over time; the index.tab at the root of each is authoritative. Where neither has a binary, nvm install compiles from source, except on non-WSL Windows, which nvm cannot build on; on FreeBSD and OpenBSD it skips the download and goes straight to source. Alpine has its own section: Installing nvm on Alpine Linux.

You can create a .nvmrc file containing a node version number (or any other string that nvm understands; see nvm --help for details) in the project root directory (or any parent directory). Afterwards, nvm use, nvm install, and nvm which will use the version specified in the .nvmrc file if no version is supplied on the command line; if no .nvmrc is found either, they exit with status 127. (nvm exec and nvm run follow the same .nvmrc lookup, but currently fall back to the active node if neither resolves — treat that fallback as undefined behavior; pass an explicit version if you need predictable scripting.) If you want the currently active version, pass current explicitly (e.g. nvm which current) — current is not affected by .nvmrc.

For example, to make nvm default to the latest 5.9 release, the latest LTS version, or the latest node version for the current directory:

$ echo "5.9" > .nvmrc

$ echo "lts/*" > .nvmrc # to default to the latest LTS version

$ echo "node" > .nvmrc # to default to the latest version

[NB these examples assume a POSIX-compliant shell version of echo. If you use a Windows cmd development environment, eg the .nvmrc file is used to configure a remote Linux deployment, then keep in mind the "s will be copied leading to an invalid file. Remove them.]

Then when you run nvm use:

$ nvm use
Found '/path/to/project/.nvmrc' with version <5.9>
Now using node v5.9.1 (npm v3.7.3)

Running nvm install will also switch over to the correct version, but if the correct node version isn't already installed, it will install it for you.

$ nvm install
Found '/path/to/project/.nvmrc' with version <5.9>
Downloading and installing node v5.9.1...
Downloading https://nodejs.org/dist/v5.9.1/node-v5.9.1-linux-x64.tar.xz...
#################################################################################### 100.0%
Computing checksum with sha256sum
Checksums matched!
Now using node v5.9.1 (npm v3.7.3)

nvm use et. al. will traverse directory structure upwards from the current directory looking for the .nvmrc file. In other words, running nvm use et. al. in any subdirectory of a directory with an .nvmrc will result in that .nvmrc being utilized.

The contents of a .nvmrc file must contain precisely one <version> (as described by nvm --help) followed by a newline. .nvmrc files may also have comments. The comment delimiter is #, and it and any text after it, as well as blank lines, and leading and trailing white space, will be ignored when parsing.

Key/value pairs using = are also allowed and ignored, but are reserved for future use, and may cause validation errors in the future.

Run npx nvmrc to validate an .nvmrc file. If that tool’s results do not agree with nvm, one or the other has a bug - please file an issue.

You can use nvshim to shim the node, npm, and npx bins to automatically use the nvm config in the current directory. nvshim is not supported by the nvm maintainers. Please report issues to the nvshim team.

If you prefer a lighter-weight solution, the recipes below have been contributed by nvm users. They are not supported by the nvm maintainers. We are, however, accepting pull requests for more examples.

In your profile (~/.bash_profile, ~/.zshrc, ~/.profile, or ~/.bashrc), add the following to nvm use whenever you enter a new directory:

Put the following at the end of your $HOME/.bashrc:

cdnvm() {
    command cd "$@" || return $?
    nvm_path="$(nvm_find_up .nvmrc | command tr -d '\n')"

    # If there are no .nvmrc file, use the default nvm version
    if [[ ! $nvm_path = *[^[:space:]]* ]]; then

        declare default_version
        default_version="$(nvm version default)"

        # If there is no default version, set it to `node`
        # This will use the latest version on your machine
        if [ $default_version = 'N/A' ]; then
            nvm alias default node
            default_version=$(nvm version default)
        fi

        # If the current version is not the default version, set it to use the default version
        if [ "$(nvm current)" != "${default_version}" ]; then
            nvm use default
        fi
    elif [[ -s "${nvm_path}/.nvmrc" && -r "${nvm_path}/.nvmrc" ]]; then
        declare nvm_version
        nvm_version=$(<"${nvm_path}"/.nvmrc)

        declare locally_resolved_nvm_version
        # `nvm ls` will check all locally-available versions
        # If there are multiple matching versions, take the latest one
        # Remove the `->` and `*` characters and spaces
        # `locally_resolved_nvm_version` will be `N/A` if no local versions are found
        locally_resolved_nvm_version=$(nvm ls --no-colors "${nvm_version}" | command tail -1 | command tr -d '\->*' | command tr -d '[:space:]')

        # If it is not already installed, install it
        # `nvm install` will implicitly use the newly-installed version
        if [ "${locally_resolved_nvm_version}" = 'N/A' ]; then
            nvm install "${nvm_version}";
        elif [ "$(nvm current)" != "${locally_resolved_nvm_version}" ]; then
            nvm use "${nvm_version}";
        fi
    fi
}

alias cd='cdnvm'
cdnvm "$PWD" || exit

This alias would search 'up' from your current directory in order to detect a .nvmrc file. If it finds it, it will switch to that version; if not, it will use the default version.

This shell function will install (if needed) and nvm use the specified Node version when an .nvmrc is found, and nvm use default otherwise.

Put this into your $HOME/.zshrc to call nvm use automatically whenever you enter a directory that contains an .nvmrc file with a string telling nvm which node to use:

# place this after nvm initialization!
autoload -U add-zsh-hook

load-nvmrc() {
  local nvmrc_path
  nvmrc_path="$(nvm_find_nvmrc)"

  if [ -n "$nvmrc_path" ]; then
    local nvmrc_node_version
    nvmrc_node_version=$(nvm version "$(cat "${nvmrc_path}")")

    if [ "$nvmrc_node_version" = "N/A" ]; then
      nvm install
    elif [ "$nvmrc_node_version" != "$(nvm version)" ]; then
      nvm use
    fi
  elif [ -n "$(PWD=$OLDPWD nvm_find_nvmrc)" ] && [ "$(nvm version)" != "$(nvm version default)" ]; then
    echo "Reverting to nvm default version"
    nvm use default
  fi
}

add-zsh-hook chpwd load-nvmrc
load-nvmrc

After saving the file, run source ~/.zshrc to reload the configuration with the latest changes made.

This requires that you have bass installed.

# ~/.config/fish/functions/nvm.fish
function nvm
  bass source ~/.nvm/nvm.sh --no-use ';' nvm $argv
end

# ~/.config/fish/functions/nvm_find_nvmrc.fish
function nvm_find_nvmrc
  bass source ~/.nvm/nvm.sh --no-use ';' nvm_find_nvmrc
end

# ~/.config/fish/functions/load_nvm.fish
function load_nvm --on-variable="PWD"
  set -l default_node_version (nvm version default)
  set -l node_version (nvm version)
  set -l nvmrc_path (nvm_find_nvmrc)
  if test -n "$nvmrc_path"
    set -l nvmrc_node_version (nvm version (cat $nvmrc_path))
    if test "$nvmrc_node_version" = "N/A"
      nvm install (cat $nvmrc_path)
    else if test "$nvmrc_node_version" != "$node_version"
      nvm use $nvmrc_node_version
    end
  else if test "$node_version" != "$default_node_version"
    echo "Reverting to default Node version"
    nvm use default
  end
end

# ~/.config/fish/config.fish
# You must call it on initialization or listening to directory switching won't work
load_nvm > /dev/stderr

Tests are written in Urchin. Install Urchin (and other dependencies) like so:

npm install

There are slow tests and fast tests. The slow tests do things like install node and check that the right versions are used. The fast tests fake this to test things like aliases and uninstalling. From the root of the nvm git repository, run the fast tests like this:

npm run test/fast

Run the slow tests like this:

npm run test/slow

Run all of the tests like this:

npm test

npm run test/fast runs make inside a clean environment (env -i ... bash -lc), so node must be on the PATH of a fresh login bash shell. If node is only available through nvm in your current shell, it fails with "Did you forget to run npm install after cloning the repo?", even after a successful npm install. In that case, run make directly from the root of the nvm git repository, choosing the test suite and shell:

make TEST_SUITE=fast test-zsh

Nota bene: Avoid running nvm while the tests are running.

nvm exposes the following environment variables:

• NVM_DIR - nvm's installation directory.
• NVM_BIN - where node, npm, and global packages for the active version of node are installed.
• NVM_INC - node's include file directory (useful for building C/C++ addons for node).
• NVM_CD_FLAGS - used to maintain compatibility with zsh.
• NVM_RC_VERSION - version from .nvmrc file if being used.

Additionally, nvm modifies PATH when changing versions, along with MANPATH wherever a manpath command exists, and NODE_PATH, if present.

The following environment variables can be set to configure nvm install:

• NVM_NO_SOURCE_FALLBACK - when 1, a failed binary download aborts instead of silently falling back to a (much slower) from-source compile; the persistent equivalent of the -b flag, and mutually exclusive with -s.
• NVM_INSTALL_LOCK_TIMEOUT - seconds to wait for a concurrent install of the same version to finish before giving up (default 600). On timeout, nvm prints the lock path so a lock left behind by a killed install can be removed.
• NVM_INSTALL_LOCK_STALE - minutes after which an install lock is assumed abandoned and stolen automatically; 0 (the default) never steals.

nvm install <version> takes a per-version advisory lock (a directory under $NVM_DIR/.cache/locks), so two shells installing the same version at once cannot corrupt its version directory; installs of different versions never block each other.

To activate, you need to source bash_completion:

[[ -r $NVM_DIR/bash_completion ]] && \. $NVM_DIR/bash_completion

Put the above sourcing line just below the sourcing line for nvm in your profile (.bashrc, .bash_profile).

nvm:

$ nvm Tab

alias               deactivate          install             list-remote         reinstall-packages  uninstall           version
cache               exec                install-latest-npm  ls                  run                 unload              version-remote
current             help                list                ls-remote           unalias             use                 which

nvm alias:

$ nvm alias Tab

default      iojs         lts/*        lts/argon    lts/boron    lts/carbon   lts/dubnium  lts/erbium   node         stable       unstable

$ nvm alias my_alias Tab

v10.22.0       v12.18.3      v14.8.0

nvm use:

$ nvm use Tab

my_alias        default        v10.22.0       v12.18.3      v14.8.0

nvm uninstall:

$ nvm uninstall Tab

my_alias        default        v10.22.0       v12.18.3      v14.8.0

nvm will encounter some issues if you have some non-default settings set. (see #606) The following are known to cause issues:

Inside ~/.npmrc:

prefix='some/path'

Environment Variables:

$NPM_CONFIG_PREFIX
$PREFIX

Shell settings:

set -e

In order to provide the best performance (and other optimizations), nvm will download and install pre-compiled binaries for Node (and npm) when you run nvm install X. The Node project compiles, tests and hosts/provides these pre-compiled binaries which are built for mainstream/traditional Linux distributions (such as Debian, Ubuntu, CentOS, RedHat et al).

Alpine Linux, unlike mainstream/traditional Linux distributions, is based on BusyBox, a very compact (~5MB) Linux distribution. BusyBox (and thus Alpine Linux) uses a different C/C++ stack to most mainstream/traditional Linux distributions - musl. This makes binary programs built for such mainstream/traditional distributions incompatible with Alpine Linux, so on x64 and arm64 nvm requests a musl build instead. nodejs.org publishes those only for some recent x64 releases, so for anything else the download 404s and nvm install X falls back to compiling from source, unless you point it at a mirror that has one (see Platforms without official binaries).

There is a -s flag for nvm install which requests nvm download Node source and compile it locally.

If installing nvm on Alpine Linux is still what you want or need to do, you should be able to achieve this by running the following from your Alpine Linux shell, depending on which version you are using:

apk add -U curl bash ca-certificates openssl ncurses coreutils python3 make gcc g++ libgcc linux-headers grep util-linux binutils findutils
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash

apk add -U curl bash ca-certificates openssl ncurses coreutils python2 make gcc g++ libgcc linux-headers grep util-linux binutils findutils
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash

Note: Alpine 3.5 can only install NodeJS versions up to v6.9.5, Alpine 3.6 can only install versions up to v6.10.3, Alpine 3.7 installs versions up to v8.9.3, Alpine 3.8 installs versions up to v8.14.0, Alpine 3.9 installs versions up to v10.19.0, Alpine 3.10 installs versions up to v10.24.1, Alpine 3.11 installs versions up to v12.22.6, Alpine 3.12 installs versions up to v12.22.12, Alpine 3.13 & 3.14 install versions up to v14.20.0, Alpine 3.15 & 3.16 install versions up to v16.16.0 (These are all versions on the main branch). Alpine 3.5 - 3.12 required the package python2 to build NodeJS, as they are older versions to build. Alpine 3.13+ requires python3 to successfully build newer NodeJS versions, but you can use python2 with Alpine 3.13+ if you need to build versions of node supported in Alpine 3.5 - 3.15, you just need to specify what version of NodeJS you need to install in the package install script.

The Node project now publishes an official linux-x64-musl binary for some recent releases (v24.20.0+ and v26.8.0+; no v25 release has one). There is no official arm64 musl binary.

As a potential alternative, @mhart (a Node contributor) has some Docker images for Alpine Linux with Node and optionally, npm, pre-installed.

To remove nvm manually, execute the following:

First, use nvm unload to remove the nvm command from your terminal session and delete the installation directory:

$ nvm_dir="${NVM_DIR:-~/.nvm}"
$ nvm unload
$ rm -rf "$nvm_dir"

Edit ~/.bashrc (or other shell resource config) and remove the lines below:

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh" # This loads nvm
[[ -r $NVM_DIR/bash_completion ]] && \. $NVM_DIR/bash_completion

To make development and testing work easier we supply a Dockerfile for development usage. It's based on an Ubuntu base image prepared with essential and useful tools for nvm development. To build the docker image of the environment, do a Docker build at the root of nvm repository:

$ docker build -t nvm-dev .

This will package your current nvm working copy with our pre-defined development environment into a Docker image named nvm-dev. After the build you should see it appear in the list of images:

$ docker images

REPOSITORY         TAG                 IMAGE ID            CREATED             SIZE
nvm-dev            latest              9ca4c57a97d8        7 days ago          650 MB

To start and enter a container based on this image:

$ docker run -h nvm-dev -it nvm-dev

nvm@nvm-dev:~/.nvm$

It takes several minutes to build the image and the image size is about 650MB, so it's not suitable for production usage.

For more information and documentation about Docker, please refer to its official website and documentation:

• If you try to install a node version and the installation fails, be sure to run nvm cache clear to delete cached node downloads, or you might get an error like the following:

  curl: (33) HTTP server doesn't seem to support byte ranges. Cannot resume.

• Where's my sudo node? Check out #43

• After the v0.8.6 release of node, nvm tries to install from binary packages. But in some systems, the official binary packages don't work due to incompatibility of shared libs. In such cases, use -s option to force install from source:

nvm install -s 0.8.6

• If setting the default alias does not establish the node version in new shells (i.e. nvm current yields system), ensure that the system's node PATH is set before the nvm.sh source line in your shell profile (see #658)

nvm node version not found in vim shell

If you set node version to a version other than your system node version nvm use 6.2.1 and open vim and run :!node -v you should see v6.2.1 if you see your system version v0.12.7. You need to run:

sudo chmod ugo-x /usr/libexec/path_helper

More on this issue in dotphiles/dotzsh.

nvm is not compatible with the npm config "prefix" option

Some solutions for this issue can be found here

There is one more edge case causing this issue, and that's a mismatch between the $HOME path and the user's home directory's actual name.

You have to make sure that the user directory name in $HOME and the user directory name you'd see from running ls /Users/ are capitalized the same way (See this issue).

To change the user directory and/or account name follow the instructions here

Homebrew makes zsh directories insecure

zsh compinit: insecure directories, run compaudit for list.
Ignore insecure directories and continue [y] or abort compinit [n]? y

Homebrew causes insecure directories like /usr/local/share/zsh/site-functions and /usr/local/share/zsh. This is not an nvm problem - it is a homebrew problem. Refer here for some solutions related to the issue.

Macs with Apple Silicon chips

Experimental support for the Apple Silicon chip architecture was added in node.js v15.3 and full support was added in v16.0. Because of this, if you try to install older versions of node as usual, you will probably experience either compilation errors when installing node or out-of-memory errors while running your code.

So, if you want to run a version prior to v16.0 on an Apple Silicon Mac, it may be best to compile node targeting the x86_64 Intel architecture so that Rosetta 2 can translate the x86_64 processor instructions to ARM-based Apple Silicon instructions. Here's what you will need to do:

• Install Rosetta, if you haven't already done so

  $ softwareupdate --install-rosetta

  You might wonder, "how will my Apple Silicon Mac know to use Rosetta for a version of node compiled for an Intel chip?". If an executable contains only Intel instructions, macOS will automatically use Rosetta to translate the instructions.

• Open a shell that's running using Rosetta

  $ arch -x86_64 zsh

  Note: This same thing can also be accomplished by finding the Terminal or iTerm App in Finder, right clicking, selecting "Get Info", and then checking the box labeled "Open using Rosetta".

  Note: This terminal session is now running in zsh. If zsh is not the shell you typically use, nvm may not be source'd automatically like it probably is for your usual shell through your dotfiles. If that's the case, make sure to source nvm.

  $ source "${NVM_DIR}/nvm.sh"

• Install whatever older version of node you are interested in. Let's use 12.22.1 as an example. This will fetch the node source code and compile it, which will take several minutes.

  $ nvm install v12.22.1 --shared-zlib

  Note: You're probably curious why --shared-zlib is included. There's a bug in recent versions of Apple's system clang compiler. If one of these broken versions is installed on your system, the above step will likely still succeed even if you didn't include the --shared-zlib flag. However, later, when you attempt to npm install something using your old version of node.js, you will see incorrect data check errors. If you want to avoid the possible hassle of dealing with this, include that flag. For more details, see this issue and this comment

• Exit back to your native shell.

  $ exit
  $ arch
  arm64

  Note: If you selected the box labeled "Open using Rosetta" rather than running the CLI command in the second step, you will see i386 here. Unless you have another reason to have that box selected, you can deselect it now.

• Check to make sure the architecture is correct. x64 is the abbreviation for x86_64, which is what you want to see.

  $ node -p process.arch
  x64

Now you should be able to use node as usual.

If you've encountered this error on WSL-2:

curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.8/install.sh | bash
% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                Dload  Upload  Total   Spent    Left  Speed
0     0    0     0    0     0      0      0 --:--:--  0:00:09 --:--:--     0curl: (6) Could not resolve host: raw.githubusercontent.com

It may be due to your antivirus, VPN, or other reasons.

Where you can ping 8.8.8.8 while you can't ping google.com

This could simply be solved by running this in your root directory:

sudo rm /etc/resolv.conf
sudo bash -c 'echo "nameserver 8.8.8.8" > /etc/resolv.conf'
sudo bash -c 'echo "[network]" > /etc/wsl.conf'
sudo bash -c 'echo "generateResolvConf = false" >> /etc/wsl.conf'
sudo chattr +i /etc/resolv.conf

This deletes your resolv.conf file that is automatically generated when you run WSL, creates a new file and puts nameserver 8.8.8.8, then creates a wsl.conf file and adds [network] and generateResolveConf = false to prevent auto-generation of that file.

You can check the contents of the file by running:

cat /etc/resolv.conf

Currently, the sole maintainer is @ljharb - more maintainers are quite welcome, and we hope to add folks to the team over time. Governance will be re-evaluated as the project evolves.

Only the latest version (v0.40.8 at this time) is supported.

If you are unable to update to the latest version of nvm, our partners provide commercial security fixes for all unsupported versions:

• HeroDevs Never-Ending Support

See LICENSE.md.

Copyright OpenJS Foundation and nvm contributors. All rights reserved. The OpenJS Foundation has registered trademarks and uses trademarks. For a list of trademarks of the OpenJS Foundation, please see our Trademark Policy and Trademark List. Trademarks and logos not indicated on the list of OpenJS Foundation trademarks are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. The OpenJS Foundation | Terms of Use | Privacy Policy | Bylaws | Code of Conduct | Trademark Policy | Trademark List | Cookie Policy